HyperX HX436C17FB3/16 is a 2G x 64-bit (16GB) DDR4-3600 CL17 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 1G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-3600 at a low latency timing of 17-21-21 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each
288-pin DIMM uses gold contact fingers.
- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP = 2.5V Typical
- VDDSPD = 2.2V to 3.6V
- On-Die termination (ODT)
- 16 internal banks; 4 groups of 4 banks each
- Bi-Directional Differential Data Strobe
- 8 bit pre-fetch
- Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
- Height 1.3425” (34.1mm), w/heatsink
HyperX Fury V3 16GB, DDR4, 3600MHz (PC4-28800), CL17, XMP 2.0, DIMM Memory
Specification
Product Description
HyperX Fury V3 16GB, DDR4, 3600MHz (PC4-28800), CL17, XMP 2.0, DIMM Memory
Series
Kingston HyperX
DDR Type
DDR4
Size
1 x 16GB
Speed
3600 MHz
Compliance
PC4-28800
Pins
288-pin
CAS Latency
CL17
Data Integrity Check
Non-ECC
Voltage
1.2V - 1.35V
Timings
17-21-21
Heatsink
Yes
Additional Information
See Overview
Package Type
Blister Pack
Package Weight
0.0225 kg
Warranty
Lifetime